Samus in Varia Suit from Metroid Prime 4: Beyond

While Samus does not wear Varia Suit for very long in Metroid Prime 4: Beyond, it is still a classic suit.  It makes me very nostalgic.

The Bambu File has been completely colored in the slicer and is ready to print as multicolor.  The current colors set for the file are Bambu Copper (most of suit), Silver (also suit), Maroon (helmet), Black (joints), Green (visor), and Cobalt Blue (cannon).  Any of these can be switched to a color of preference.  My suggestion is to print the model as a single color, then paint it.  Within the “preview” of the slicer, it is noticeable that a .2 mm layer height will not appropriately print some of the very fine details; one example is the tubes in front of the mouth.  The model was printed was printed at a .12 mm layer height under “High Quality.” At this layer height all the details were clearly represented.  After printing there was noticeable support scaring by the chin and under the shoulders on both sides (see image).  This was minimal, but still should be mentioned.