Water leak sensor holder for IKEA Klippbok

✨ [ Model Overview ]   

Holder for the IKEA sensor model KLIPPBOK smart Water leak sensor. This is the sensor compatible with the Matter protocol (Part number from Ikea is : 506.177.69

The 2 screw holes are 6mm diam. for mounting

☝️You can add a tissue or fabric under the sensor for a Capillary action or water wicking effect to increase the reach of the sensor, just make sure the tissue has good contact with the 2 steel pins under the sensor. Great to mount the senso on a vertical surface or a sump pump pit wall.

📇 [ Printing ] 

No special considerations for printing, no temporary supports needed.

PLA worked fine for my application but PETG might be better if exposed to hotter environments.

Use the material according to your application. 

⚖️ [ Licence and terms of use ]

When you download the files, you understand and agree that this content is licensed under a Standard Digital File License.

You can : 

(✔) Personal use : Download the digital file(s) for free and print 3D parts from the digital file(s) for your own use.

You cannot :

(X) Sell parts : manufactured from the digital file(s) or any derivative of the digital file(s), no matter how the parts are made, how many parts are made.  This also prohibits you from selling parts made from the Digital file(s) on sites such as eBay, Etsy, FB marketplace or any other location. 

(X) Share the digital file(s) or resell them. 

Liability disclaimer and use:

By downloading the digital file(s) and making a 3D printed derivative object from it, you agree that you're doing it at your own risk and understand the limitations of 3D printed parts.  The digital file(s) are not a product and the design do not give any express or implied warranty that, any product made from the digital file(s), will work or perform in a certain way.