MKS Mosfet Case (MOSFET MKS MOS25)

MKS Mosfet Case (MKS Mos25)  - made for Anycubic Kobra 2 Series

Version 01:  If the printer has higher legs, using the extensions in the link https://www.printables.com/model/729460-anycubic-kobra-series-foot-extension 

Version 02 : for standard legs of the 3d printer

Printing parameters  :

• Layer height : 0.2
• Perimeters : 3
• Solid layers : 4
• Infill : 15%
• Support : YES  - only for top case
• Brim : Outer brim only 10 mm
• Material : PLA
• Printer : Anycubic Kobra 2 Pro

Components required for assembly for ver. 01 :

• 2 x screws M3
• 2 x inserts M3
• 2 x screws M4
• 2 x T slot nut M4

Components required for assembly for ver. 02 :

• 4 x screws M3
• 4 x inserts M3

If you print this accesories please share your make, leave a review, and drop a like!

Example link where to buy electronic component:

3D Printer Hot Bed Power Expansion Board Heating Controller MOSFET High Current Load Module 25A 12V or 24V for 3D Printer Parts: 

https://www.aliexpress.com/item/1005006180539527.html?spm=a2g0o.detail.pcDetailBottomMoreOtherSeller.2.5964qVrQqVrQeO&gps-id=pcDetailBottomMoreOtherSeller&scm=1007.40050.354490.0&scm_id=1007.40050.354490.0&scm-url=1007.40050.354490.0&pvid=3b784f43-6401-42bb-8bc0-db6ae92ba620&_t=gps-id:pcDetailBottomMoreOtherSeller,scm-url:1007.40050.354490.0,pvid:3b784f43-6401-42bb-8bc0-db6ae92ba620,tpp_buckets:668%232846%238115%232000&isseo=y&pdp_npi=4%40dis%21RON%2131.45%218.89%21%21%2148.35%2113.67%21%402101fb1417069477060758025e1550%2112000036162477351%21rec%21RO%21%21AB&utparam-url=scene%3ApcDetailBottomMoreOtherSeller%7Cquery_from%3A