Pixelsnap Charging Stand. Modern and Easy Print - Free 3D Print Model

Search models, users, collections, and posts

Abstractia Design

Household>Decor

IP Report

Print Profile(1)

All

P1S

X1 Carbon

A1 mini

H2D

H2S

P2S

X1E

P1P

H2C

H2D Pro

X2D

A2L

0.2mm layer, 2 walls, 15% infill

Designer

4.3 h

1 plate

4.9(14)

Open in Bambu Studio

Boost

325

220

161

Released

Bill of Materials

Maker's Supply Kits and Parts

Select all

Rectangular Transparent Double-Sided Adhesive

Bambu Filaments

Select all

Matte Mandarin Orange (11300) / Refill / 1kg

PLA Matte

PLA Basic

Description

PixelSnap Sphere | Google Magnetic Charger Stand

Elevate your charging setup with the PixelSnap Sphere, a modern, minimalist stand designed specifically for the Google PixelSnap magnetic charger. This isn’t just a utility piece; it’s a geometric statement for your workspace that combines the organic feel of a textured sphere with precision engineering.

⚡ Designed for PixelSnap

Unlike generic stands, this model features a precision-engineered internal cavity designed for a perfect press-fit with the Google PixelSnap magnetic charger. Once seated, the charger stays secure, allowing you to "snap" your phone into place at the perfect viewing angle for notifications, video calls, or Standby mode.

🛠️ Key Features

Press-Fit Precision: Designed specifically for the Google PixelSnap magnetic puck for a seamless, cable-managed look.
No Supports Required: Optimized geometry allows for a clean print straight off the build plate without the need for messy support structures.
Ergonomic Viewing: Holds your device at an ideal angle for desk use or nightstand viewing.
Tactile Texture: The sphere features a sophisticated textured surface that hides layer lines and provides a premium aesthetic.

📐 Print Settings

Material: PLA, PETG, or Matte filaments look best.
Supports: None!
Walls: 2–3 walls for a solid feel.
Note: Dimensions are fixed to ensure the press-fit tolerances are maintained for the PixelSnap charger.
linked adhesive pads recommended if you want to lock your dock down to your desk

⚖️ Commercial Licensing & Support

If you love my designs and want to support my work, I offer several ways to do so:

Patreon: patreon.com/AbstractiaDSGN
- Tiers include simple support or Full Commercial Licenses to sell physical 3D prints of my designs.
MakerWorld Licensing: You can also purchase commercial rights directly through the MakerWorld licensing system.
Support Directly: Want to say thanks for a free file? Buy me a coffee here.

⚠️ RE-UPLOAD & IP WARNING

Protecting my work is protecting my livelihood. This design is protected by Digital File Licensing. Please do not download and re-upload these files to other platforms. I use automated scanning to monitor other marketplaces; unauthorized uploads or sales will be met with immediate legal action and DMCA takedowns via the MakerWorld legal team.

DO NOT sell physical versions of this model on Etsy or any other storefront without an active commercial license.

magnetic phone holder

Comment & Rating (21)

@Danielfraga5175

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

this turned out perfect! thanks for the great design!

@mor10

Based on the comments (and logic) I modified the design to have an insert at the bottom and filled it with fishing weights. It's still a bit wobbly when you take the phone off, but stays mostly put. The design is exacting and prints out beautifully with Bambu Wood PLA.

@user_3673992366

Superb print! Thanks!

@user_2151300214

Boosted

Turned out great, the 25w charger I purchased from Amazon fits perfectly, I added a little silicone to the charger so the magnet wouldn't pull it out of the stand. Have you thought about making an additional base that can be weighted and attached to the bottom with screws or glue?

@dejonghe

Boosted

This printed very good and is very stable on my nightstand, added some "anti-skid" adhesive rubber on the bottom and it works great ! Thank you very much!!!

@dejonghe

Boosted

Excellent print, worked well with my Pixel Snap chargers, added just a tiny bit of adhesive tape on the inside lip as my mag case is so strong it wanted to pull the charge puck out.

@user_766999475

print is amazing, however puck is very loose, how are you finding it in place?

@jamjamiii

yeahhh thx

@tripleoe

Print Profile

0.2mm layer, 2 walls, 15% infill

@dtdesignz

Print Profile

0.2mm layer, 2 walls, 15% infill

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.