GoPro Hero filter flip attachment

GoPro Hero filter flip attachment

I wanted to be able to flip color filters while diving, without popping filters on and off during the dive.

This is designed specifically for GoPro Hero 8-13 official case (only) , and for use with GEPULY Underwater Dive Filters for GoPro Hero 8-13, which you can get on Amazon for about $25.

https://www.amazon.com/GEPULY-Underwater-Official-Waterproof-Correction/dp/B0C5HF4RL6

Pop the filters out of the frame they come with, which is easily done with a small screwdriver.

You'll need 10 M3x8mm stainless screws (4 for the clamps, 6 for the hinges) if you want to use all 3 at once.

The holes on the clamps have one side slightly bigger than the other, so be sure to thread them in the right way.

I used this for a week of diving in the Sea of Cortez, and worked great, except the frames warped when left out in direct sunlight.  So, don't do that, or print out some extras to take a long.

Print with supports enabled to help minimize the stringing from the overhang, or just cut off the strings and it still works fine.