Star Trek: Enterprise NCC-1701-D #10356 Wall Mount
Print Profile(1)
Bill of Materials
.jpg)
Description
Needed a Wall mount for me L*go Star Trek Enterprise but was a bit concered for the weight of it!
Designed a 2-part print, the main “fingers” that hold the model are printed for maximum layer strength and the other part for best quality and compressinal stregth (screws into the wall). i used 5.5mm diameter M4 heat press inserts and M4 20mm (could be shorter) bolts to hold the “finger” part in place. but you could get away without the inserts. i didnt use the exact parts in the BoM, but they should work!
I printed in PLA Tough+ and also have done one in PET-CF both have been good for a week, so far!
But use this at your own risk!!! its a heavy model and 3D prints have their limits.
P.S no mount for the shuttle craft… i just used double sided 3M tape…
License
You may create derivative works based on this object, provided that all such derivative works are published exclusively on the MakerWorld platform and include proper attribution to the original creator. You may not share, upload, host, distribute, or publish this object—or any derivative work of this object—on any other digital platform, marketplace, or distribution channel. Commercial use of this object and any derivative works is strictly prohibited. This includes, but is not limited to, selling, renting, sublicensing, or using the object in any context in which you receive monetary compensation or other financial benefits.
Comment & Rating (1)