spamoni

cover

Partially down.jpg

Down.jpg

Screenshot 2026-01-04 065604.png

Screenshot 2026-01-04 065659.png

Screenshot 2026-01-04 065648.png

PXL_20260104_114620467.jpg

plate_1.png

Used Support for this model;<ul><li>Type: Tree (Auto)</li><li>Style: Tree Hybrid</li><li>On Build Plate Only</li></ul>When removing the support, I found a small flat head screwdriver and inserting it along the vertical edge pushing it to the center of the mesh.

0.2mm layer, 2 walls, 15% infill

PXL_20260506_222500184.jpg

This model is similar to the original.  I was requested to adapt it for the A1-Mini.  I have now attached the A1-Mini Model which is split in 2 pieced with attachment points.  You can glue them together or simply press them together.  Note:  When taking the Supports off, make sure the small rectangle piece is fully removed to ensure it fits in the corresponding hole. Also note:  to make the supports easier to remove, please set the Z-Distance Top and Bottom to .32

Kevin

IMG_0133.jpeg

IMG_0134.jpeg

IMG_0135.jpeg

IMG_0136.jpeg

Print Profile for PETG-HF, Normal Grid Support type makes it easier to remove supports. 0.2mm Layer,2 Walls,15% infill

PETG-HF, Normal Supports, 0.2mm layer, 2 walls, 15% infill

Wanted to cover the Vents under the driver and passenger seats of my 2026 Tesla Model Y Juniper  Purchased 2 covers which did not fit as indicated.  Decided to 3DPrint my own.  Simpy Print and slide down from the top. The attached images shows it partially down and almost fully down.  Easily slides into place with enough give to move as needed.  Does not restrict the air flow but does protect against things items from going into the vents.

2026 Tesla Model Y Juniper Vent Cover

PXL_20260506_222448499.jpg

2026 Tesla Model Y Juniper Vent Cover for A1-Mini

ASIA

Print Profile(3)

Description

Comment & Rating (54)

License

Remixes (1)

Related Models