Print Profile(3)
Bill of Materials
- M5 x 8/10/12/16/20 Screws Assortment Kit x 1: https://a.co/d/bfWidsO
- M5 Hex Nut Pack x 1: https://a.co/d/cRw3o8g
- M3 x 8/10/12/16/20 Screws Assortment Kit x 1: https://a.co/d/5XMmRu3
Description
19-inch rack mount for the Ubiquiti UniFi Cloud Gateway Fiber (UCG-Fiber 30W) and power supply unit.
Designed for a clean, secure rack installation while keeping airflow and serviceability in mind.
Boost Me (for free)
I make these models available for free, and it takes time and materials to design and test them.
If this model helps you, Boosts are greatly appreciated — thank you!
If you’d also like to support my work and buy me a coffee☕
Optional support:
https:/Ko-fi.com/m1k3y2004
🔩 Hardware Required
- 6 × M5×10 screws (left/right mount connection)
- 6 × M5 hex nuts (left/right mount connection)
- 4 × M5×16 screws (PSU body to left mount)
- 4 × M3×10 screws (PSU body clips)
- 4 × M3×20 screws (center mount back connection)
Note: Hand-tighten screws only.
🖨️ Print Settings
- Rafts: Not required
- Supports: No
- Layer Height: 0.2 mm
- Walls/Perimeters: 4
- Infill: 20% or higher
Filament: PETG (recommended for heat resistance)
Other Related Files
The right mount without the keystones can be found here:
https://makerworld.com/en/models/2215275-my-ucg-fiber-19-rack-left-right-mount-blank.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (56)