ENFEN Test. Neuropsychological Evaluation.

ENFEN Ring Test for professional use. 

This is my first contribution to the community, and I chose it to be for those who dedicate their time to helping other people.

This is the second version I've made, and unlike the first; I've joined the edges of the base and rounded the tips of the 3 towers, and also added modifiers to the infill of the joint between the towers and the base, as in the first model they were prone to breaking.

I added 4 holes of 10.7mm diameter and 0.4mm depth. The goal is to allow you to add 10mm rubber stoppers (Bumpons), so it doesn't slide when placed on a surface.

I recommend printing with PETG to ensure its longevity, in my case, I have printed with PLA, and for correct use, there is no problem. 

ATTENTION: These are still 3 “tall” towers on a base, so it is not recommended to store it in a stacked backpack as there is a possibility that they may break, although I repeat, I have modified the infill and if printed in PETG or used correctly, there should be no problem. But well, it's not unbreakable.

I hope it is useful to you. I will be making more types of TESTS.

** THE IMAGES CORRESPOND TO VERSION 1. I did not take photos of the second version, but I am printing another set right now; I will upload updated images shortly.

Every Boost is welcome and appreciated. I will be contributing more to the community.