Glencairn Glass Holder
Print Profile(3)
Description
Do you have a whiskey problem… err.. I mean storage problem??
This holder is designed to hold 4 standard Glencairn glasses with a very satisfying snap fit! This model prints with no supports and can be printed in any material since it is a very small load. To mount the holder to a wall or cabinet, you will need 2x #4 flat head screws. Make sure they are not pan heads or any other head type or else they will interfere!
Take the mounting bracket and a bubble level and first mark your holes on your cabinet or wall; pre-drilling or using a center punch is recommended to ensure the screws don't walk when you are sinking them. Next, screw the back bracket onto the wall making sure that the straight edge is facing down and the countersink side of the hole is facing towards you. Lastly, slide the holder over the bracket and you are all set!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (3)