Search models, users, collections, and posts

Hakko FX888 Soldering Tip Holder

IP Report

Print Profile(2)

All
H2D
X1 Carbon
H2S
P1P
X1
H2D Pro
P2S
X1E
P1S
H2C
A1

Hakko Soldering Tip Holder 7.16 mm Holes
Hakko Soldering Tip Holder 7.16 mm Holes
Designer
5 h
2 plates
5.0(1)

Hakko Soldering Tip Holder with Heat Insert Tips
Hakko Soldering Tip Holder with Heat Insert Tips
Designer
5.1 h
2 plates

Open in Bambu Studio
Boost
0
7
1
1
7
4
Released 

Bill of Materials

Bambu Filaments
Select all
ABS Blue (40600) / Refill / 1kg
ABS
x1
ABS Tangerine Yellow (40402) / Refill / 1kg
ABS
x1
TPU 90A / Black (51103) / 1 kg

Description

This is a soldering tip holder designed for the Hakko FX-888D/FX-888 series soldering iron stand, with capacity for up to 17 tips. While it is designed for the FX-888, it should be compatible with other Hakko models;  verify measurements to ensure proper fit.

 

Two print profiles are included. One profile accommodates standard soldering tips along with five slots specifically sized for smaller-diameter heat-set insert tips. The second profile features uniformly sized slots designed for 7 mm diameter tips, with a small amount of clearance to allow for easy insertion and removal.

 

The holder is designed to fit securely into the Hakko iron stand—tight enough to remain in place when lifted, yet easy to install without excessive force. TPU feet are included to help prevent the holder from sliding during use (small amount of super glue required to glue them in place).

 

While manufacturing tolerances may vary between Hakko products, this design should fit most units without issue.

 

Below are links to the tips I have installed in this holder.  If your tips are a different diameter, message me and I will change the hole size for your application. 

 

Heat Set Insert Tips Amazon

Soldering Tips Amazon

 

Test models printed in ABS, but should work fine in other materials as well.   Brim can be removed in printing with lower temperature materials that don't require enclosed chamber.  

Boost Me (for free)

If you like my models, give me some feedback or give me a boost.

Comment & Rating (1)

(0/1000)

License

This user content is licensed under the MakerWorld Exclusive License.

You may create derivative works based on this object, provided that all such derivative works are published exclusively on the MakerWorld platform and include proper attribution to the original creator. You may not share, upload, host, distribute, or publish this object—or any derivative work of this object—on any other digital platform, marketplace, or distribution channel. Commercial use of this object and any derivative works is strictly prohibited. This includes, but is not limited to, selling, renting, sublicensing, or using the object in any context in which you receive monetary compensation or other financial benefits.