Mini ITX Computer Case - Suits AM4 CPU and 240mm GPU - Free 3D Print Model

Search models, users, collections, and posts

mklements

Hobby & DIY>Electronics

IP Report

Print Profile(1)

All

P1S

P1P

X1 Carbon

X1E

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm layer, 2 walls, 15% infill

Designer

16.3 h

6 plates

4.8(6)

Open in Bambu Studio

Boost

202

395

382

Released

Description

Fully 3D printable computer case for a Mini-ITX motherboard. Designed to accommodate a AM4 CPU with included cooler (Stealth Cooler), a full size GPU up to 240mm in length and a TFX power supply in the bottom.

You'll need to print the main case body and side panels using the full print bed area on the P1S or X1C, so you'll need to follow the Bambulab's guide to utilise the full print bed (you won't be able to use the AMS at the same time) - https://wiki.bambulab.com/en/knowledge-sharing/print-volume-limitations

The case requires some M3 brass inserts for screws to complete the build.

Visit my blog for details on compatible hardware and for full assembly instructions - https://bit.ly/4bRlRCR

Comment & Rating (10)

@droopster1984

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

good design! thanks for sharing!

@Sinjected

Really like the look of this one. Any specific reason you went with a TFX PSU instead of SFX or Flex? You definitely have the room for either of those more common form factors.

@user_1617172553

Would be great if the maker could mod the PSU mounting to fit SFX or Flex.

@user_2746015328

Print Profile

0.2mm layer, 2 walls, 15% infill

good idea but proprietary to only parts shown in the picture. had to use flex psu because the sfx or sfx-l is too wide. gpu needs a really slim graphics cards. my 9060 xt 240mm was too fat.