Hose holder/parking clip for Bosch GAS 12-25 PL

Description:
Simple 3D-printed holder to “park” the suction hose on a GAS 12-25 PL dust extractor so it doesn’t drag on the floor or flop around during storage/transport. The original part from BOSCH was really flimsy and I broke mine after just 2 months.

The design combines:

• Snap/slide mounting clip (rear fork) that grips an edge/feature on the vacuum body
• Circular hose cradle that keeps the hose in place
• Split clamp with a tightening point so you can tune the grip (no rattling, but still removable)

Compatibility:

• Intended for Bosch GAS 12-25 PL dust extractor
• Sized for the original Bosch hose that comes with it (or same OD). If your hose is slightly different, scale XY a few percent or adjust clamp tolerance.

Print recommendations:

• Material: PETG / ASA recommended (workshop temps + impact). PLA works but is less forgiving.

Material required:

• Designed to work with the original screw that broke of the original part.
• Or use a self tapping 4x12 mm  screw for example: https://www.aliexpress.com/item/1005008724193768.html?spm=a2g0o.productlist.main.1.44255244alVRjP&algo_pvid=be612300-b643-41d8-95f9-8ae018fa4ad0&algo_exp_id=be612300-b643-41d8-95f9-8ae018fa4ad0-1&pdp_ext_f=%7B%22order%22%3A%225377%22%2C%22eval%22%3A%221%22%2C%22fromPage%22%3A%22search%22%7D&pdp_npi=6%40dis%21CZK%2115.33%219.50%21%21%215.07%213.14%21%40211b61bb17663315825892637ecb71%2112000046404089819%21sea%21CZ%21174537676%21X%211%210%21n_tag%3A-29919%3Bd%3A1dd71f21%3Bm03_new_user%3A-29895&curPageLogUid=LGob529EAWmz&utparam-url=scene%3Asearch%7Cquery_from%3A%7Cx_object_id%3A1005008724193768%7C_p_origin_prod%3A

Assembly / use:

1. Mount the rear clip onto the vacuum’s edge/slot where you want the hose parked.
2. Push the hose into the ring.
3. If your version uses a screw/knob: tighten only until the hose stops slipping (don’t crush the hose).