froggomad

cover

4.3 inch (294 mm)

plate_1.png

2025-12-18_e82e52a09e4ae.png

<h3>Scaling</h3><p>If you wish to change the size of the model, you can simply uniform scale the model in Bambu Studio to attempt smaller or larger prints. But you will likely need a smaller nozzle and/or modified print settings to ensure fine details are printed in smaller sizes. I attempted this at 50% size with my 0.4mm nozzle and most fine details were simply gone even though visible in the slicer.</p><p>&nbsp;</p><h3>Supports</h3><p>Print with supports and be <strong>very </strong>careful removing them, especially around the silencer. I recommend snipping away supports as much as possible before doing any prying. Some supports may be unnecessary - especially where they go under the model’s arm in a very tight space. You may want to paint your own supports rather than letting the model generate them if you care about removing every last bit.</p>

0.2mm layer, 3 walls, 15% infill - 0.4mm nozzle suggested

<h4><span style="color: rgb(0,0,0)">This arc raider stands and holds his kettle at the low ready. Perfect for an Arc Raiders scene or… tabletop game?</span></h4>

Print Profile(1)

Description

This arc raider stands and holds his kettle at the low ready. Perfect for an Arc Raiders scene or… tabletop game?

Comment & Rating (1)

License

Related Models

Arc Raider With Kettle