Pipette Descaling Nespresso Gran Latissimo
Print Profile(1)
Description
The hot water outlet on the machine is used only for descaling and, otherwise, is protected by a cover on the back of the machine.
The original part is very fragile and breaks easily... When printing on the media, care must be taken with the printing location.
The water outlet nozzle is reinforced because the original is very fragile; a seal has also been placed on the top and bottom to make it easier to remove.
Printing should be done on PETG because the water comes out at high temperatures.
Don't forget to remove the magnet and the rubber part from inside the old part and reinstall it.
The Lattissima has several magnetic switches, so it may be necessary to sand down the thickness of the support a little.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)