Microplane Grater Cover
Print Profile(1)
Bill of Materials
- 3mm Elastic Shock Cord x 1: Less than 20 inches need for each one
Description
Microplane grater covers have become worse and worse as they use cheaper plastic and the molds degrade. Yeah, they only charge $1 for a replacement, but they aren't really worth it.
So I went down the rabbit hole and tried a bunch of others. Some were decent replicas, but honestly the basic mechnism was flawed. So I ended up designing my own. These print flat, and the only thing you need is some 3mm shock cord.
Just print out whichever one you want and then run shock cord through each tube connecting the two pieces. Make sure it is pulled tight so that it just stretches a little bit. Then you can hook one end over one end of the grater and pull the other end over the other.
License
You may create derivative works based on this object, provided that all such derivative works are published exclusively on the MakerWorld platform and include proper attribution to the original creator. You may not share, upload, host, distribute, or publish this object—or any derivative work of this object—on any other digital platform, marketplace, or distribution channel. Commercial use of this object and any derivative works is strictly prohibited. This includes, but is not limited to, selling, renting, sublicensing, or using the object in any context in which you receive monetary compensation or other financial benefits.
Comment & Rating (2)