Crevice Tool for Samsung Jet Series Vacuum Cleaner - Free 3D Print Model

Search models, users, collections, and posts

Turbopstros

Household>Other House Models

IP Report

Print Profile(1)

All

P2S

P1P

X1E

A1 mini

H2D Pro

H2D

H2S

P1S

X1 Carbon

H2C

X2D

A2L

0.2mm layer, 3 walls, 15% infill

Designer

1.7 h

2 plates

4.9(9)

Open in Bambu Studio

Boost

177

159

120

Released

Description

This is a compact crevice tool attachment designed for Samsung Jet vacuum cleaners. My vacuum only came with long, bulky attachments, so I designed this smaller nozzle for better access to tight spaces.

Compatibility

This crevice tool fits the entire Samsung Jet 60 / 70 / 75 / 85 / 90 / 95 / Bespoke Jet vacuum cleaner series.

Advantages

The compact size gives you precision control while maintaining full suction power, making it ideal for detailed cleaning tasks where the standard attachments are too large.

Will It Fit My Setup?

The tolerances are very precise and optimized for Bambu Lab P2S with Bambu Lab Matte PLA.

Test Before Full Print: The print profile includes a quick test ring to verify fit with your printer/filament combination. The attachment must slide fully onto the vacuum tube until it reaches the end stop.

Fitting Issues?

Too tight: Increase X-Y hole compensation by +0.1mm increments in your slicer
Too loose: Decrease X-Y hole compensation by -0.1mm increments in your slicer

Adjust the Quality → Precision → X-Y hole compensation setting and reprint the test ring until you achieve a perfect fit.

Boost Me (for free)

🚀 Boost Me if you love this design & support more cool prints! ⚡🔧

vacuum cleaner accessories

vacuum cleaner attachment

Comment & Rating (22)

@0000000888

Hi @Turbopstros, I came across your Dyson-to-32 mm adapter and it looks close to what I need. I’m using a Samsung Jet 95, and the brush head is clogged. A replacement is about $200, while generic 32 mm vacuum heads are $20–$30. Would it be possible to make a version for the Samsung Jet 95 connection? It uses a 3-pin connector, but I don’t need the powered function—just a mechanical adapter. Ideally: Female Samsung Jet 95 connection Male 32 mm outlet I’ve attached photos of the Samsung connector, your Dyson adapter example, and the generic head I want to use. Thanks, Isaac

The designer has replied

@turbopstros

Hey Isaac @0000000888 I've just published new print profile with the adapter for 32mm. Unfortunately I do not have any 32mm head, only 31.5mm. Please, test it with your 32mm head and let me know if any dimensions need to be adjusted. Thanks!

@0000000888

Replying to @turbopstros :

Hi @turbopstros, Thanks for publishing the 32 mm adapter profile, I appreciate it. I’ll test it with my 32 mm head and let you know if any dimensions need adjusting. One reason I’m interested in this is that spinning brush heads are a nightmare if you have long hair. Hair wraps around the spindle, creates friction, heats up, and eventually wears out the plastic gears that drive the brush. Once that happens the head is basically junk. Being able to use a simple non-powered 32 mm head avoids that problem. I also think adapters like this could get a lot of downloads if there were variations such as: Dyson (female) → 32 mm (male) Samsung Jet (female) → 32 mm (male) Dreame (female) → 32 mm (male) Tineco (female) → 32 mm (male) Roborock (female) → 32 mm (male) There are millions of these vacuums out there and replacement heads are expensive, while standard 32 mm heads are cheap and easy to find. Thanks again — I’ll report back after testing.

@0000000888

Replying to @turbopstros :

I think your right about this the external measurement of these heads are 32mm which means the internal dimension should be between 31.5 and 31.8 Ive justed checked the one I just purchased the internal dimension is 31.5mm

@Thoraxs

Print Profile

0.2mm layer, 3 walls, 15% infill

Yes, it’s an excellent model. I slightly adjusted the entry point because I don’t like visible seams. Everything turned out nice and tight in the end. This is exactly the kind of nozzle I was missing. Printed it on the A1 Mini — first did a test version to check the fit for my vacuum cleaner, and it matched perfectly, so I printed the final one. Thanks to the author!

The profile uploader has replied

@turbopstros

That's awesome! thank you for the photo and for the review.

@Thoraxs

This really looks awesome – almost like a factory-made product)

@Kubansky97

Print Profile

0.2mm layer, 3 walls, 15% infill

The profile uploader has replied

@turbopstros

Thanks for the photo and the rating! Hope it works great for you 💪

@user_4056688073

Fits perfectly. Thank you.

The designer has replied

@turbopstros

Love to hear that, thanks for the review 👍

@Aarzgebirg87

Great print Could you upload a longer version of this

The designer has replied

Show original

@turbopstros

Hey, what dimensions would you need?

@ZH4ever

Print Profile

0.2mm layer, 3 walls, 15% infill

@LunaLi

Print Profile

0.2mm layer, 3 walls, 15% infill

@user_1894898365

Print Profile

0.2mm layer, 3 walls, 15% infill

@user_1491616720

Print Profile

0.2mm layer, 3 walls, 15% infill

@user_411540259

Print Profile

0.2mm layer, 3 walls, 15% infill

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Tool Box

Leo.w8

13.6 k

3.8 k

Jet Joystick

Coffey Manufactury

17.4 k

6.8 k

phone usb-c dust remover

Izzodesign74

11.3 k

1.8 k

Throwing Knife

Nathan Wise

16.9 k

3.5 k