Oral-B IO series 7, 8, 9 double-toothbrush stand

A Braun Oral-B IO double toothbrush stand for the series with magnetic charger: that should be Oral-B IO series 7, 8, and 9.

The stand features two toothbrush holding towers with cavities underneath to fit either a magnetic charger, or the dummy inner pad (see picture below - the cylindrical part on the right hand side of the picture) that is part of the 3D model. If you want to have two toothbrushes charging simultaneously, you can insert two magnetic chargers, in which case you don't need to print the dummy inner pad at all. If you don't want to use the stand with a charger, you will (obviously) need to print two of the dummy inner pads (copy the object twice on your plate before slicing and printing). I use this stand with one dummy inner pad and one magnetic charger as you can see in the attached pictures of the printed model. Once the toothbrush is charged, I move it over to the dummy pad to prolong the battery life. When using two toothbrushes in this configuration, one will obviously be charging and the other one will not.