Search models, users, collections, and posts
Modular hair claw clip
IP Report
Print Profile(1)
0.2mm layer, 2 walls, 15% infill
6 h
6 plates
Open in Bambu Studio
Boost
2654
6624
281
26
7.6 k
5 k
Released
Description
Here is a modular hair claw clip with 3 different claw. The system is very simply.
- You don't need support on the clamp, and you still need it on the clip.( you should set the overhang threshold to 35 degrees to use less material)
- The opening problem is solved thanks to the comment. Now the clip claws are smaller and the pliers open wider
- There are two forms of clamp and clip, a straight one (V3) and a slanted one (V3 slanted).
Print detail :
- Material : PLA
- Print layer : 0.16mm
- Support : Everywhere
- Infil : 15%
Dimension:
- Clamp V3 : 40mm/35mm/20mm
- Clamp V3 droit : 40mm/35mm/27mm
- Clip 1 : 70mm/40mm/22mm
- Clip 2 : 60mm/33m/22mm
- Clip 3 : 60mm/25mm/22mm
Please give me return to improve it and ad new claw. Thank you.
License
This user content is licensed under a Standard Digital File License.
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (281)