HUB 4-pin MOLEX sockets Case on Z-Axis - A1
Print Profile(1)
Description
Case designed and intended for the 4-port HUB for Bambu Lab printers, which you can find for sale at low cost on Aliexpress, Temu etc, and which allows you to split a 4-pin (MOLEX) output from your printer into 4 sockets thus available for all Bambu Lab AMS & AMS lite, as well as all BIGTREETECH products or various accessories (LED strip, fans etc).
The case is intended to be fixed to the back of the Z-axis of the Bambu Lab A1 in the already provided holes and using 2 screws from the hardware kit supplied with the printer (see photo). M3x10 screws can also be used. The case is thus better secured than with double-sided tape and can be moved or positioned elsewhere.
Special feature: THE CONNECTIONS ARE ORIENTED TOWARDS THE REAR of the printer and not to the side, which makes it more practical in certain cases. The operation indicator LED (HUB power-on) is perfectly visible at a glance on the side.
Can be printed in PLA or PETG.
Model designed to be printed at 0.16mm for a perfect fit (but can also be printed at 0.20mm without issue).
Happy printing,
Thank you for your possible support.
Boost Me (for free)
A little boost is always appreciated, especially if you like my model.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (15)