Floatwheel ADV FF Fender

v2 ADV FF Fender (Released 4/4/25)

• Requires 20mm m5 screws x8
• Thicker model structure for strength
• Cleaner look w/ screw hole covers
• Optimized for vertical printing to prevent layers ripping apart when riding

Printer Settings:

• For max strength, print with PETG and print slowly.
• If printing slow and with support, 20/40 fan speed. Aux fan off.
• 6 walls with 30% cubic or gyroid recommended.
• For a clean print, support is recommended at the very top of model (the peak overhang), the fin slots, and the bottom line of the mud flap.  (the 3mf project file should have this already painted on for you as manual tree supports)
• I have printed this model without supports, and it somewhat works, but be warned that the finishes will not look clean.

*v1 versions can still be downloaded as .stl files (I have removed their 3mf profiles)

Add-On Prints:

• Fins here
• Shield here