Elegoo Centauri Carbon Internal Side Spool Holder

-This is a model designed for single spool use, which is probably how the Elegoo Centauri Carbon 1 will remain. For this, I have created a box with spool holders using the interior space, similar to the system used by Core One. It's a system that works very well and reduces external space by adding only 2.5 cm of width to the original casing, leaving more room for things like a filament dryer. Before printing this modification, you should know that it requires some skill, patience, and super glue………Once all the pieces are glued, you just need to make the through holes for the frame, place the filament sensor where it best fits, and drill the casing to connect it to the original external PTFE cable. You also need to drill a hole and glue the coupler to insert the filament. The spool holder is not centered to leave more space for your hand, allowing for better filament loading. To distinguish the placement position, one side of the frame is slightly wider and should be placed on the left. This is a design I created for myself, but since the final result is good, at least for me, I decided to publish it so others can try it and draw their own conclusions about its use. The file comes divided into different print trays. For those with a 300mm3 printer, you can print the box with the spool holder as a single piece, which is how I printed it. For the rest, it would have to be done in pieces and then glued. I recommend using ABS or PETG as PLA will deform with heat. If you have any questions, feel free to ask and I will answer. Thanks!!!!!