Satisfying Hexagon Fabric

NASA-Inspired Mesh Fabric🚀
Seen quite a few different mesh designs going around, and I thought Why not give it a shot. This mesh has a limited range of motion, but it is extremely satisfying to play with and very calming to touch. 
 

The joints are automatically printed into the mesh, so no assembly is required.

Printed With: 

Sunlu PLA 2.0 White, 

Sunlu PLA Grass green

Any stiff filament should work fine with this model; make sure it is dry if possible.

I encourage people to build upon this model and remix it. Please share your creations, and if you want, make some cool-looking things with them.

If you'd like a bigger version, e.g., X1, H2, P1 Printers, and you don't have any knowledge of modelling software, I'd be happy to make the model the size you need. Pop me a message or leave a comment on this post, and I will get back to you ASAP.

Recommendations📝
Would recommend printing with a Smooth PEI or a Textured (Sparcle, Carbon-Fibre) PEI Plate to get maximum satisfaction on the first layer. 

If you don't have one of these, that's okay; the Standard Texture PEI Plate will work, just with a rougher first-layer finish.

Plate 2: This plate holds the model for printing the external linkages to join other fabrics together, which can be cut and glued after printing.

This is also plate 2 at a larger view.

Plate 3: This plate has no external linkages.

Plate 3: As you can see, there are no linkages on the plate 3 models.

Plate 3 and plate 2 show the differences between them.

Licensing of the Print📝

This model follows the “Creative Commons Attribution NonCommercial-Share Alike” https://creativecommons.org/licenses/by-nc-sa/4.0/ Please read to understand your position when printing this model.