SPOKING MODULES for Mini Mountain Bike Wheels
Print Profile(1)
Description
these modules must be used to spoke the wheels for my miniature mountain bikes
ATTENTION!!! you must insert or glue the red-colored spokes shown in the picture FOR BOTH the bottom disc and the top disc. For everything to work, the flat side of the rear hub must face upwards, and the other side downwards. You must also glue a wire, which you can find in my minibike models, into the module's hole (I used hot glue for this. You don't need to glue the orange pieces in the picture, as I added an elevation directly into V2 of the model. The spokes must be bent from paper clips as shown, then glued with superglue. You need 8 spokes per side; if you follow the pattern shown in the picture, do the top side exactly the same way. TIP: let the glue dry in between; I once didn't, and I completely lost my temper during the process )
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)