Z-Axis Bearing Cover⧸ Tested Tolerances
Print Profile(1)
Bill of Materials
Description
This bearing attracts dust like a magnet, and sweeping the floor around the printer only makes it worse. Here’s the fix: a clean, tight fitting cover for P2S Z axis bearings. Fits also the X1, X1C, P1P and P1S.
 Designed as part of my ongoing collection of practical Bambu Lab upgrades. Each model is conceived, printed, and endurance-tested on my own machines, refined through dozens of iterations to match the printer’s true mechanical behavior. Precision isn't assumed here, it’s verified layer by layer.
Bambu Lab P2S: P2Series Design Journey
Follow me if you like my work, that kind of appreciation really dries my filament. Likes and boosts feed the Maker World algorithm and keep the new models coming |
The two shells snap together like a small puzzle. Precisely aligned cutouts and tight tolerances make installation effortless, and once clipped in place the cover sits almost play free on the bearing.
No screws to remove, no axis to disassemble. The two piece design fits perfectly around the existing hardware.
Please note: this model can be installed on the X2D without any issues and fits perfectly while also looking great. However, the maximum usable height is reduced by 5 mm, changing from 261 mm to 256 mm. For that reason, I marked the model as not compatible, despite it physically fitting and working perfectly on the X2D.
Part #31 in my P2Series Design Journey.
Boost Me (for free)
Support for this model helps fund 3D printing in a local school in Lower Saxony, Germany. Contributions go toward printers and filament for student maker and robotics clubs, including preparation for "Jugend forscht" competitions. Likes, follows, and boosts help increase visibility and indirectly support hands-on technical education.
Translation Notice: I am not a native English speaker. I write all descriptions in English to ensure the best automated translation into other languages. To make the text smoother and more readable, I use language tools to refine my wording.
Bill of Materials Notice: Hero Shot models are usually printed in Bambu Lab PLA Basic, primarily Pumpkin Orange, Purple and Matte Charcoal Black. The Bill of Materials contains the recommended filament for the model, which may differ from the filament used for the photos.
Purchases made via the BOM support my work through the Maker World Commission Incentive at no extra cost to you.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (759)