Simple Stone Dice Tower v1 & v2

My son wanted a dice tower of his own as he had been using an early version of one of my dnd boxes for rolling dice.  I quickly put this together for him and had it printed in a couple hours. The base and the tower lock together so they don't move around.

Version 2 Changes: 

• Noticed that my kids were breaking the parts off the top.  Added a bar around the top to make them more sturdy
• Added parts to the underside of the ramps so that it could print without supports
• Filled in the part under the bottom ramp so that it was solid and not hollow
• Changed the front wall on the base to be thicker and a little more snug when the tower is stored in it.

Info:

Tower v1:

• Overall size: 99.68mm tall x 51.37mm wide x 51.37mm deep
• Supports needed
  • Suggest blocking supports on the underside of the tower as they are a pain to remove

Tower v2:

• Overall size: 99.68mm tall x 51.37mm wide x 51.37mm deep
• No supports needed

Base v1 & v2:

• Overall size: 27.69 tall x 59.39 wide x 119.39 deep
• No supports needed