Voron Redmi Note 4x/Xiaomi 5 Host Controller Mount (A1 mini single plate print, no enclosure interference, complete skirt)

voron红米note4x上位机支架（封箱无干涉，裙边完整）Voron Host Computer Bracket for Redmi Note 4X (No Interference with Enclosure Assembly, Intact Skirt)

这是一个适配voron三叉戟的红米note4x上位机支架，筑波苦于网上一直没找到可以对封箱和裙边无干涉的上位机支架，于是自己改了一个，可以上下翻动，带风扇散热，背板的孔位是我自己画的，大家可以对着自己的孔位改改，中间的裙边筑波会发在主页的另外一个模型里，大家可以看看

This is a host computer bracket for the Redmi Note 4X, compatible with the Voron Trident. Zhu Bo (Note: A personal name, or a username; retained as is) struggled to find a host computer bracket online that would not interfere with the printer's enclosure assembly or skirt (Note: "Skirt" refers to the outer protective/structural edge of the 3D printer, a common term in 3D printing contexts). As a result, Zhu Bo modified one themselves. This bracket can be flipped up and down, comes with a fan for heat dissipation, and the hole positions on the backplate were designed by Zhu Bo. Everyone can adjust the hole positions to match their own setup. The middle skirt part will be shared by Zhu Bo in another model on their homepage, so feel free to check it out.