Battery box for 18350 batterys
Print Profile(2)
Description
This is a battery box for 18350 batterys!
There are two print profiles. One for flat top batterys and one for button top batterys.
These are flat top:
These are button top:
Recommended filament: PLA
Hotend: 0,40mm
Print time: 0:44h
Print instructions:
- layer height 0,20mm
- 2 wall loops
- top/bottom shells 4 layers
- top/bottom shell thickness 0,80mm
- sparse infill 10%
- sparse infill pattern “gyroid”
- enable support
- Support type “tree manual”
- Support style “tree slim”
- support on build plate only
Before printing, make sure your build plate is clean and apply some adhesive. Wash the build plate with oil free soap and wipe it off with some paper towels. For build plate adhesion, apply a thin, even coat of your preferred adhesive. I repeat the process every 5-6 prints.
Bad build plate adhesion is not related to the model.
Please check out my other models https://makerworld.com/en/u/1597610120 and leave me a like and a decent rating if you were satisfied. Thank you in advance!
Have a look at my other models here: SaVo3D | Home - MakerWorld
Boost Me (for free)
If you liked the model and found it helpful, I’d really appreciate it if you could give it a boost! It makes my day and helps make up for the time I spent making sure you had a great printing experience. Thanks a lot in advance!
Membership
Do you want to sell physical prints of my models? Join my commercial license program!
Fix adhesion-related printing errors by washing the build plate
Bambu Lab Textured PEI Plate Cleaning Guide | Bambu Lab Wiki
License
Comment & Rating (3)