Pharmaceutical Capsules Earrings (Flat)

A pair of flat earrings representing pharmaceutical capsules.

If you are looking for a more realistic version with proportions matching actual capsules, you can check out my alternate model here.

Bill of Materials

You will need:

• Earring hooks
• Eye pins for earrings (0.6 mm diameter, 16 mm length or more)

A very small amount of glue can be useful to ensure the eye pins stay firmly in place.

Instructions

Each earring has a small hole at the top. Simply insert an eye pin through the hole, then attach the hook to the eye pin.
If needed, you can apply a tiny drop of glue to the eye pin before inserting it to secure it more effectively.

You can assemble two or three capsules per hook, using eye pins of different lengths, to create more complex earrings.

Printing recommandations

• Use a 0.2 mm or 0.4 mm nozzle with the Arachne wall generator enabled in your slicer for the best results.
• Print on a smooth build plate (smooth PEI or similar).
• If you experience adhesion issues, make sure your build plate is thoroughly cleaned.