UniFi USW Flex 2.5g 8 POE 10" rack panel mount

10" Rack Mount Panel for Ubiquiti UniFi Switch Flex 2.5G PoE

This is a 10-inch rack front panel designed for the Ubiquiti UniFi Switch Flex 2.5G PoE. The switch sits flush with the front of the panel and is centred for a clean, professional look inside compact 10" racks.

It’s sized to fit perfectly underneath my UniFi Express 7 (UX7) rack panel, creating a matching two-unit setup for anyone building a small UniFi stack in a 10" enclosure. You can mount or remove the switch without removing other panels, which makes upgrades and cable changes significantly easier.

Features

• Custom fit for the UniFi Switch Flex 2.5G PoE
• Flush and centred for a tidy and uniform rack appearance
• Matches and aligns with my UX7 rack panel above it

Hardware Needed

Uses the same mounting hardware as the UX7 panel:

• 2 × M3 heat-set inserts (max 6 mm length recommended)
• 2 × M3 screws (8–10 mm length)

Print Notes

• Recommended material: PETG
• 3 perimeters for added stiffness
• 20–30% infill is plenty for typical installations

This panel keeps the Flex switch secure and helps make small UniFi racks look intentional and well-laid out - especially when paired with the matching UX7 panel above it.