GB Spook Central LED Lens Covers & PCB Mount

These are 2 files for a particular mod for Ghostbusters Pinball - Spook Central Mod

LED Lens Covers

This will allow you to print a different shade of lens cover or print a new one if you have lost one - simply load up the job and swap out the colour of filament and print. The lens covers suit a 5mm square white led that comes with the led strip within your mod. To install simply add a dot of hot glue to the led and press on a new lens cover.

PCB Mount

This allows you to print a new PCB mount if a previous has been damaged or your prefer to change out the colour. You will need to either extract the 2 nuts from the previous PCB mount or get a few M3 non-nyloc nuts and press in - I used the existing bolt to install and tension up to pull the nuts into their recesses. With the mods supplied I have Grey and Hot Pink.

Hope it helps.

I do ask if you download something that was helpful for you - please give the model a LIKE or a BOOST - as that gives me motivation to design, create and share more.

And if you want to hear about more designs being released click the FOLLOW button.