Prestige 91P Keyless Vehicle Remote Transmitter

My friend had broken his original remote for his truck and asked if I could print a new case. Looks like a Prestige 91P keyless remote that retails for about $80 online. I couldn't find any available .stl files online, so I decided to try and model the remote housing from scratch, and this is the result. It takes 2x CR2016 batteries that are retained in the rear part. You will need to remove the pos+ connector along with the buttons from the original and use them in this model. I was able to get a successful print out of ABS, PETG, and PET-CF. The CF print looks the worst, but it should hold up to any abuse you throw at it. I modeled it to snap together at the top and sides, and you can use 2x M2x8 screws and nuts to secure the bottom together. 

If you have any fitment issues due to your filament choice, or other factors, I have included the Solidworks model for both sides as well. 

Here is a more detailed description of the remote from an online retailer:

This remote comes with easy programming instructions to make the system in your car accept this remote.  Battery included.  The number on the circuit board is F122-047-05A.  The FCC ID on the back of the remote is H5OT43 or H50T43.  The part number is 91P.  This remote has been tested to ensure it sends proper signals.  We have free tech support to help you complete the programming.  This remote is classified as an Audiovox Type 13 Transmitter. This means it can be used to replace or be replaced by other Type 13's like 620TXP, PROPLTX, APS920TX2P, PA91, 101TXP, APS620CFP, 140TXP, APS920CF2P, PA120C, and 91MP.  This remote was made for these Prestige Systems: APS101N, APS45N, APS620N.