Print Profile(1)
Description
Thermoelectric Generation Coaster
Overall Dimensions: Length 127mm, Width 90mm, Height 166mm
Principle: The coaster has a semiconductor thermoelectric cooler. When there is a temperature difference on both sides of the cooler, according to the Seebeck effect, a small voltage will be generated on the positive and negative terminal wires, which can drive a small coreless motor.
Demonstration:
Bill of Materials:
No | Name and Model | Quantity | Image |
1 | Semiconductor Thermoelectric Cooler TEC1-12706A (40*40mm*3.6) | 1 pc |  |
2 | 0412 Coreless Motor 0.7mm Shaft | 1 pc |  |
3 | Round Heatsink (Diameter 80*1.5mm 5052 Aluminum) | 1 pc |  |
Wiring Diagram:
Installation Instructions:
1、Thermal grease can be applied between the semiconductor thermoelectric cooler and the round heatsink
2、The connection of each component is done by gluing
PS：
1、It is recommended to print with PETG material, because PLA has poor heat resistance, and the larger the temperature difference, the faster the fan rotates
2、It is best to use a flat-bottomed cup, so that the bottom of the cup can fully contact the semiconductor thermoelectric cooler for better thermal conductivity
Model recommendation
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)