Devcon 14285 - Devcon Mark V Mixing Nozzle 1 to 1

Devcon 14285 - Devcon Mark V Mixing Nozzle 1 to 1

This print will save you money.  It is approximately 17.5 times cheaper than buying it stock.  

It works with PLA but I recommend using ABS or PETG for durability.  

I printed at: 10 walls and 100% infill. 

Additionally, there is no need to rotate the stick fully to lock it in.  It works great when you feel solid resistance when turning it.   This will be far enough.  

Feel free to improve it if you find anything you want to change.