Parametric 10in Mini-Rack Panels
Print Profile(1)
Bill of Materials
- Cage nuts or other fasteners x 4: As desired, you may need more or fewer depending on the size of the panel you're printing. 4 per RU is a good ballpark.
Description
Parametric 10" Mini-Rack panels.
Includes an inset modifier sub-component which can be used with zero-top/bottom layers to create infill mesh blanking panels for racks with active or passive cooling. This modifier could also be used to decrease infill density to save weight/material. while keeping the ears and outer frame higher-density for strength.
Or just remove the inset modifier altogether, and set a large faceplate depth to create storage trays for your mini rack.
The source-files are almost identical except:
- "Type A" is the original source file which has the modifier and faceplate thicknesses tied to the same value.
- “Type B” is a variant which has the modifier and faceplate thicknesses on separate variables to enable trays to be generated.
Note in both files, the modifier is always front-aligned. I don't currently have a plan to create a version where the modifier is rear-aligned.
Built from dimension schematics linked below;
Files generated from the parametric source file should be compatible with most 10" mini-rack builds.
https://mini-rack.jeffgeerling.com/#standard
Print face-down for best results.
License
Comment & Rating (1)