DJI Osmo Quick-Release V2 (Nano /Action series)
Print Profile(2)
Description
Hey everyone,
I made a complete Redesign of my Dji Osmo Quick-Release Model. I changed basically everything and now it is very similar to the off the shelf product from dji.
It is fairly strong and holds up well. I advise to be careful when mounting a camera with accesories because it does come loose when beeing shaken fairly strong and having a bunch of weight hanging out far. That beeing said using only my Dji osmo Nano Camera Module i havent managed to get it to fall out. When shaking violently with the camera and vision dock mounted together i have managed to shake it loose.
You will require two 4-5mm x 20-35mm springs which i sourced from cheap ball point pens (see last picture). It is possible to intertwine 2 springs or use stiffer ones to achieve a stronger grip.
For assembly simly place the spring into the cutouts designed to hold it steady on both the main body and prong and then slide a cut piece of Filament (approx. 20mm) through the holes. I also used a lighter to melt down the ends of the filament and press it down so it wont come loose. Works without doing this as well tho.
PETG and PLA profiles available!
~1h print time
~10g Filament
I hope you enjoy!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (10)