Laser aiming help for Fengda/Timbertech airbrush

This is meant to be a laser assisted aiming help for airbrushing.

Different small frames for attaching two 6mm laser modules to the side of a Timbertech ABPST01 or Fengda BD-130 airbrush. The angle is fixed so depending on which angled attachment you chose the focal point of the lasers will be at different distances. The higher the angle the closer the laser dots converge.

0D = 8.5cm
5D = 5.0cm
10D = 4.0cm
15D = 2.5cm

Is this actually useful? Dunno, I did it more because I found the idea funny.

If you actually plan on making this be careful with your eyes. Lasers can be dangerous, yo. Either make sure you don't use a laser higher than class II or use laser alignment glasses with the proper OD rating for your lasers wavelength.