Pink Gin Folding door display box

If you find my designs interesting and useful, and would like to see more in the future, please consider giving me a boost and becoming a supporting member. 

Also, if you need parts for any of my designs, please use the BOM link provided on the model page when buying. This gives me a small commission.

🌸 Pink Gin Folding Display Box

This Pink Gin Display Box is based on my folding door design that I’ve used across several of my display boxes. The doors open in a smooth, cascading motion from the center, creating a really satisfying and unique way to reveal the bottle inside.

The box is mildly modular, meaning you can add or remove door segments to make it taller or shorter depending on the bottle size. It’s a fun print that looks great on display and works nicely as a functional showcase piece.

This Pink Gin edition is the first of many designs built on this same base model. I’ll be releasing more themed versions using this structure as a default, each with different logos and small design variations. If there’s a logo or brand you’d like to see next, feel free to let me know.

All versions share the same assembly guide and photos, so if you’ve built one, you’ll be familiar with them all.

Details:

• Folding door system with smooth opening motion
• Modular height adjustment
• Optional LED base for lighting effect
• Needs light support for some parts
• Uses 6 mm rods + 6x2mm round magnets

3D printed parts :

• knobs x 2
• Pins for top door parts x 2
• Base x 1
• Top x 1
• Back pcs x 11 to 17
• Door parts x 22 to 34

Other parts required :

• 2 pcs Steel rods ø6mm  (See instructions below for required length)
• 22-34 pcs Round Magnets 6x2mm (amount depends on how many lvl)
• Optional : Led Lamp Kit 001

Tools :

• Hacksaw/angle grinder for steel rods.
• Ca glue
• 3d printer. 😅

You can find the steel rods you need here  →   (affiliate link)
This is an affiliate link — I may earn a small commission if you buy through it, at no extra cost to you. It helps support my future designs.

Follow the detailed instructions below for assembly.

Each individual part is marked with a number. Use the assembly guide to find out where all the parts should go.

Start >

The box should now look like this. 

If you like my model.  Please consider giving it a like and follow me for more unique models in the future! 

Follow me if you want to see more of my designs in the future!