Jurassic World InGen Type 6 Utility Vehicle
Print Profile(1)
Description
This is my take at the InGen Type 6 Utility Vehicle Featured in the latest Jurassic World movie.
The main body is a multicolor print with modifier blocks so be careful if you make any modifications. I have also updated the flushing volumes, but I HIGHLY recommend you calibrate them on your own.
I use https://makerworld.com/en/models/112380-ams-purge-calibration-v2#profileId-129748 AMS Purge Calibration V2 card by Ciuf_Ciuf.
For this print, I used eSun basic pla black, tan, yellow, and red for this print.
The parts fit together pretty self explanatory, if the axle blocks are not snug its probably in the wrong spot or orientation. Otherwise, the seats and wheels are all interchangeable. a dab of superglue will hold all parts in place.
Take good care removing the supports as some parts are small/thin, I suggest using a good pair of craft cutters.
Boost Me (for free)
Boosts are Very Appreciated and help me a lot, Thank you!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (2)