HackMan3D

cover

thumbnail_IMG_0216.jpg

thumbnail_IMG_0219.jpg

thumbnail_IMG_0220.jpg

plate_1.png

thumbnail_IMG_0229.jpg

thumbnail_IMG_0230.jpg

25 cm version, need to reduce layer height if you want smooth finish on overhang.

0.2mm layer, 2 walls, 10% infill

2025-10-24_d116b0f21e4bf8.png

0.2mm layer, 2 walls, 15% infill

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

Fluid Bear – Figurine minimaliste Ourson stylisé aux lignes fluides, pensé pour une impression simple et un rendu lisse. Le modèle fourni mesure 10 cm de haut, mais vous pouvez le redimensionner librement selon vos besoins.<h2>Conseils d’impression</h2><ul><li>Matériau : PLA (recommandé pour la simplicité et la stabilité)</li><li>Hauteur de couche : 0,16–0,24 mm (0,2 mm passe très bien)</li><li>Coques/Parois : 2–3 périmètres</li><li>Infill : 10–15 % (Grid/Gyroid)</li><li>Orientation : debout (sur les pieds)</li><li>Supports : Oui (idéalement touching buildplate / supports arbres pour limiter les marques)</li><li>Adhérence plateau : Brim léger (3–5 lignes) conseillé pour sécuriser la base</li><li>Refroidissement : actif standard PLA</li><li>Tolérances : modèle monobloc, pas d’assemblage</li></ul><h2>Finition</h2>Un léger ponçage + apprêt peut sublimer les courbes. Peinture acrylique possible.<h2>Remarques</h2><ul><li>Redimensionnable sans contrainte : si vous agrandissez fortement, augmentez un peu l’infill et/ou les périmètres.&nbsp;</li></ul>Mots-clés : figurine, ours, minimaliste, déco, sculpture, smooth, PLA, support, monobloc, design

Fluid Bear – Minimalist Figurine A stylized bear with fluid lines, designed for simple printing and a smooth finish. The provided model is 10 cm tall, but you can freely resize it according to your needs<h2>Printing Tips</h2><ul><li>Material: PLA (recommended for simplicity and stability)</li><li>Layer height: 0.16–0.24 mm (0.2 mm works very well)</li><li>Shells/Walls: 2–3 perimeters</li><li>Infill: 10–15% (Grid/Gyroid)</li><li>orientation: standing (on its feet)</li><li>Supports: Yes (ideally touching buildplate / tree supports to limit marks)</li><li>Build plate adhesion: Light brim (3–5 lines) recommended to secure the base</li><li>Cooling: standard active PLA</li><li>Tolerances: monolithic model, no assembly</li></ul><h2>Finishing</h2>Light sanding + primer can enhance the curves. Acrylic paint possible<h2>Notes</h2><ul><li>Resizable without restriction: if you significantly enlarge it, slightly increase the infill and/or perimeters&nbsp;</li></ul>Keywords: figurine, bear, minimalist, decoration, sculpture, smooth, PLA, support, monolithic, design

Print Profile(2)

Description

Printing Tips

Finishing

Notes

Comment & Rating (23)

License

Related Models

My Little Fluid Bear