Butterfly Knife 4th Gen Print in Place, no supports, high texture

Search models, users, collections, and posts

Engineer Z

Toys & Games>Other Toys & Games

IP Report

Print Profile(2)

All

P1S

X1 Carbon

X1E

H2D Pro

P2S

H2D

H2S

P1P

H2C

X2D

A2L

A1 mini

0.2mm layer, 2 walls, 15% infill

Designer

3.4 h

3 plates

4.7(62)

Improved Infill and Speed, Adaptive Layer Height

1.3 h

1 plate

4.8(29)

Open in Bambu Studio

Boost

563

1329

145

2.1 k

1.4 k

Released

Description

Content has been automatically translated.

Show original

Key Points

Please do not print separately, as they cannot be assembled if printed separately

Please make sure to maintain the relative positions of all parts, otherwise, they will not open or close

Introduction:

1, Print in Place, no assembly required

2, The handle length is 110mm

3, A total of 3 versions

Features

Material: PLA, very easy to print

Supports needed: No

Other parts besides 3D filament needed: No

Assembly required: No

Tips:

1, When printing the blade, the temperature is set to be lowered (this temperature is for PLA material), if using PETG material, please change this temperature to avoid print failure

2, Please make sure to completely remove the brim before folding, it may not be smooth at first, but after folding a dozen times, it will work very well

3, Please add brim to prevent warping on both sides

Other Butterfly Knife Version Recommendations:

Boost Me (for free)

Thank you very much!

Balisong Butterfly Knife

Comment & Rating (145)

@Le0n._.

Print Profile

0.2mm layer, 2 walls, 15% infill

I made two of these. First with a black blade and then with a grey blade. Really fast and easy print. Printed in Sunl PETG black / grey and BL PETG HF Cream

The profile uploader has replied

@fenderz

thanks. please add Brim like below picture show. it will be better.

@Le0n._.

Lol i had those. But it doesnt mind. really love the knife

@fenderz

I hope this model brings you some fun.

@IAFF

Print Profile

Improved Infill and Speed, Adaptive Layer Height

Other Issues:I had some issues like the print would come off every time I try printing it.

The profile uploader has replied

@MistaaB

What printer do you use and what build Plate, If you have adhesion Problems Its probably the build Plate.

@IAFF

Replying to @MistaaB :

I use bambu a1, and the textured pei plate. On all the other prints it works

@MistaaB

Replying to @IAFF :

So i personally use the cold Plate bacause it isnt effected by Touch and oils. I would recommend you cleaning it and maybe moving the printer to a warmer Spot. my friend hast an a1 and it prints flawless on His Maschine. but thank you for the Feedback.

@printernoob2026

Print Profile

0.2mm layer, 2 walls, 15% infill

Fantastic! Printed without issue, I picked one of the knives and did a clone print on one plate, so once it finished, I had a matching pairs for my kids. We used Bambu green, and glow-in-the-dark blue. So the blades glow blue at night! The kids love them!

The profile uploader has replied

@fenderz

have fun！Glad you like it.

@3dprinting4silv

Print Profile

0.2mm layer, 2 walls, 15% infill

printed perfectly. not the best flicker but it was fun to play with.

The profile uploader has replied

@fenderz

thank your message. I hope this model brings you some fun.

@GADGER04

Print Profile

0.2mm layer, 2 walls, 15% infill

Great training tool. really good fit and finish.

@Banana_lover12

I printed this for my mom but fell in love with it, I have to print another lol

@MephalaBlitz

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

Great print! There are small supports at the base of the blade you have to tear off, but they come off easily and everything moves seamlessly once they’re removed. I had some light stringing but it cleaned up nicely with a flame.

@diego.mosquera

Print Profile

0.2mm layer, 2 walls, 15% infill

Very easy to print!

@Kinyon

Print Profile

0.2mm layer, 2 walls, 15% infill

The profile uploader has replied

@fenderz

I'm very happy to see the picture you sent. I hope this model brings you some fun.

@BERNARDO67

Print Profile

Improved Infill and Speed, Adaptive Layer Height

I like that it prints lying down so it doesn't fail. 5 stars

The profile uploader has replied

Show original

@MistaaB

Thank you for your rating!

@BERNARDO67

Replying to @MistaaB :

Thank you for responding

Show original

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.