Trencher/Breacher: Model-P - Pump Action Blaster - Free 3D Print Model

Search models, users, collections, and posts

BrewBoy

Props & Cosplays>Cosplay Weapons

IP Report

Print Profile(2)

All

P1P

P2S

H2C

P1S

H2D

X1E

H2D Pro

X1 Carbon

H2S

X2D

A2L

0.16mm layer, 4 walls, 15% infill

Designer

49.4 h

10 plates

5.0(3)

Breacher - 0.16mm layer, 4 walls, 15% infill

Designer

31.8 h

9 plates

5.0(1)

Open in Bambu Studio

Boost

266

500

238

Released

Description

TRENCHER MODEL-P

IMPORTANT: This is a toy that fires a projectile! Never fire at pets or unwilling participants. This can damage drywall and eyeballs, use caution and protective eyewear. Never brandish this as a real weapon or bring it out in public. Just because you know it's a toy, doesn't mean other people will. Make sure to check your local laws regarding replica firearms/ toy guns. Enjoy, be safe, and be smart!

This project is a work in progress.

The Trencher Model-P is a pump-action redesign of the Trencher Carbine inspired by the Winchester Model 1897 or the Trench Gun as it is sometimes called. This redesign is meant to be easier to use and allow for a faster rate of fire, while adding a nice companion piece for the Trencher Carbine. The Model-P uses the same magazines & ammo as the Trencher Carbine & Junker-S so if you have already printed those, you can cut down on the filament needed.

Printed Parts:

Hardware:

Hardware Type:	Hardware Size:	Number Needed:
Machine Screw	M3x6 mm	6
Machine Screw	M3x12 mm	4
Machine Screw	M3x25 mm	6
Machine Screw	M3x30 mm	3
Hexnut	M3	17
Compression Spring	0.5x5x20 mm	2
Compression Spring	0.8x10x115 mm	1
Compression Spring	0.6x10x120mm	1
Extension Spring	0.5x5x20mm	1

Assembly Instructions:

STEP 1:

STEP 2:

STEP 3:

STEP 4:

STEP 5:

STEP 6:

STEP 7:

STEP 8:

STEP 9:

STEP 10:

STEP 11:

STEP 12:

STEP 13:

Comment & Rating (24)

@Jammi

Just finished printing this, amazing model, only issue is I'm not sure how the safety latch attaches, the instructions show it being attached with a screw but there isn't anything to attach it to

The designer has replied

@BrewBoyBlasters

It should just screw into the plastic

@Jammi

Replying to @BrewBoyBlasters :

Doesn't seem there's anything for it to screw into, im using the exact size screws required, also assuming it doesn't actually work to stop the blaster shooting?

@BrewBoyBlasters

Replying to @Jammi :

Its just decorative, not actually functional

@Asdf0815

Boosted

ive printed the trencher. the black one. but seems the barrel does not fit the front. you can see it in the slicer yourself. the diameter is wrong. what am i supposed to do now? can you kindly correct the measurements? thanksedit:cannot add a picture

(Edited)

The designer has replied

@BrewBoyBlasters

That's very strange, I will check that out.

@BrewBoyBlasters

I believe I may have uploaded an older barrel version, ill fix that as soon as spossible

@BrewBoyBlasters

Thank you for bringing this to my attention, I have updated the print profile to contain the correct sized barrel. I am sorry for the wasted filament. You should be able to reprint just the barrel by skipping all the other parts on that plate.

@BrixAndStuff

make a nerf version please that would be so cool :)

The designer has replied

@BrewBoyBlasters

I would like too, but I have no experience with nerf guns. I have the STEP files uploaded so it will be easier to modify if anyone else with more experience wants to try

@BrixAndStuff

Replying to @BrewBoyBlasters :

i believe that if you were to launch the dart merely by a spring or bungee cord (not using air or anything difficult liek that), it should be pretty similar to other launching mechanisms--just everything has to be made to nerf size

@BrewBoyBlasters

Replying to @BrixAndStuff :

I will look into it for my next project. I forgot about stringer blasters. It would take too many changes to get this one firing nerf darts, so I'll probably start with just a single shot stringer.

@user_3187286400

could you make a glock, desert eagle or P90 that shoots and shell ejects?

@user_3755500386

Hello, Great model and print Only difficulty, where do you find the springs Thank you in advance

The designer has replied

Show original

@BrewBoyBlasters

I purchase my springs off of AliExpress from the Chong-Su spring store. You will not be able to find springs in the exact length needed, it is easier to get 305mm springs and then cut them down to the correct size. Just make sure that the wire diameter and outer diameter are the correct size.

@user_3755500386

Replying to @BrewBoyBlasters :

Great thanks I ordered now all that's left is to wait

Show original

@user_3456842189

can you make a Thompson sub machine gun military style please

@FISHYSAILOR1

does it shoot the 6mm airsoft BBS also does it shoot far distance

@Jammi

printing this model now, looks amazing, is it possible to get the slide mechanisim that comes off the pump action handle to be hidden inside the model? would look amazing

@Asdf0815

Boosted

Print Profile

Breacher - 0.16mm layer, 4 walls, 15% infill

@thegreatsplash

Print Profile

0.16mm layer, 4 walls, 15% infill

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.