Moon Cat Neon Light – 3D Printed Wall Decor
Print Profile(1)
Description
Cat Neon Assembly Guide
This model represents a decorative neon-style cat sitting on a crescent moon.
The design is intended for 3D printing and illuminated using EL wire (electroluminescent wire).
It is suitable for small to medium printers with a minimum bed size of 18x18 cm.
3D Printing Parameters
• Nozzle: 0.4 mm
• Layer Height: 0.2 mm
• Material: PLA (or PETG/ABS if exposed to sunlight)
Assembly Instructions
1. Print all pieces of the model.
2. Use cyanoacrylate glue (super glue) to join the printed segments together.
3. Once the glue sets, carefully press the EL wire (electroluminescent wire) into the prepared groove.
4. Insert the wire with its flattened side down. For tighter curves, trim the flat side slightly to allow smoo
5. Connect the wire to a suitable inverter (5V USB or 12V car plug version).
Additional Tips
• Ensure the groove is free of stringing or debris before inserting the EL wire.
• Avoid sharp bends to prevent damaging the glowing core.
• Test the light before final mounting on the wall or stand.
Model designed for MakerWorld by Kornelia RJ - 2025
Documentation (1)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (1)