GOINGMAKE Track Saw Parallel Guide System holder. - Free 3D Print Model

Search models, users, collections, and posts

David K

Tools>Hand Tools

IP Report

Print Profile(1)

All

P1S

X1 Carbon

X1E

H2D Pro

P2S

H2D

H2S

P1P

H2C

X2D

A2L

0.2mm layer, 3 walls, 15% infill

Designer

19.5 h

1 plate

5.0(5)

Open in Bambu Studio

Boost

204

143

Released

Description

This is a wall mount holder for the GOINGMAKE Track Saw Parallel Guide System with Micro Adjustable Flip Stop and Zero Calibration for Woodworking Repeatable Rip Cuts for Track Saw Guide Rail Compatible with Festool, Makita, Milwaukee.

Printed in PETG but could be printed in PLA. This is a long print, but could be modified to print quicker (just not skilled enough yet to optimize it).

Comment & Rating (16)

@maikp

Print Profile

0.2mm layer, 3 walls, 15% infill

I have adapted the system holder to my guide rails - parallel stop and printed it with PETG HF

Show original

@robincrew

Boosted

it looks like we have the same set of parallel guides, what changes did you make to fit your set from the Goingmake set?

@maikp

Replying to @robincrew :

Hello, I scaled the box on the axis ( X, 82.28 % ), ( Y, 107.60 % ) and ( Z, 75.10 % ) I would recommend measuring the width and thickness of your rails and measuring the openings in the slicer to see if the rails fit My rails still have some play or air

(Edited)

Show original

@jevy

Replying to @maikp :

is that the Enjoywood version you have? That's what I have so if you have dialed it in, I'll reproduce it

@BigE4110

Print Profile

0.2mm layer, 3 walls, 15% infill

Very happy with the Print. I added a couple small negative spaces for the 2 adjustment alen keys needed to lock them to the rail section in the middle. perfect solution for my needs. Thank you for the time and effort put into making this!

@user_1127637629

Looks great! Would you be will willing to share the file?

@BigE4110

Replying to @user_1127637629 :

If I still have them on my laptop I definitely will.

@user_1127637629

Replying to @BigE4110 :

That would be great - thanks!

@user_1127637629

Printed in PETG and added some holes to hold the alen keys. I used .2mm standard in stead of .2mm strength and switched to gyroid for the infill. it seems pretty solid and saved about 1.5 hrs in print time. Like you I'm still learning so I'm sure speed can still be improved. The only complaint is that the holes that hold the rods are very tight. Nice job!

@robincrew

Boosted

Many thanks for the file. This is the Veiko set. I scaled the Y axis down to 90% so the fit wouldn’t be as loose, but left the others the same. The side holders became storage for the hex key for adjustments and I’ll just drill 2 new holes to fit the thin rip poles in the center area.

@BecomingCubed

This looks great, I’m about to print this! how do you like the going make parallel guides? I’m about to order some. already have the track square that these work with.