Bank Card/ID Card Storage Case (Print in Place, no supports, A1 mini printable)

Print in Place no supports no assembly no hardware built-in hidden buckle smooth opening and closing super high quality direct printing from phone

Foreword: This is a multi-generational optimized hinge, hidden buckle, and lid opening method I believe you won't regret it after printing The lid is only one-third the thickness of the box This is the final form of the box When closing, you will also hear a very satisfying sound and can easily open the lid with one hand

Additionally, some people reported too many partitions I can only say you won't regret it after printing Perhaps everything you can think of, I already considered during the design This model has many details

1 Can easily store 25 bank cards, ID cards, and utility cards The card storage slots are designed with ample space making insertion and removal very smooth

2 Model dimensions: External dimensions 94*87*58mm

3 PLA and PETG can both be printed A1 mini is supported

4 To ensure print quality, make sure to thoroughly clean the build plate before printing and wait for the model to cool down before removing it after printing Because the model has card slots, you need to wait a little longer (about 20 minutes)

5 To prevent warping, small circular brims have been added it is recommended not to cancel them

6 To ensure model quality, 3 walls are set

7 It is not recommended to modify parameters you can print directly from your phone

8 Both single-color and dual-color models are uploaded dual-color printing is highly recommended, it is truly beautiful