Charging Tray Cupra Tavascan for Samsung Galaxy Flip 6
Print Profile(1)
Description
Charging tray for the Cupra Tavascan for Samsung Galaxy Flip series phones. Due to the angled shelf of the wireless charging station in the Tavascan, the Z Flip slides down, making reliable charging impossible without using a USB-C cable.
This charging tray raises the folded smartphone to the ideal height of the charging coil. This allows the Z Flip to charge wirelessly properly and quickly, like any normal smartphone. The precise fit ensures a secure hold, but also easy removal of the device.
No case was intended for this model!
To prevent the Samsung Z Flip from scratching even after long use, TPU for AMS is recommended for the lower layers. However, this is not a prerequisite. PLA can also be used as an alternative, in which case the infill should only be increased to at least 15%.
For the upper layers, a stiff material such as PLA or higher should be used. The surface of PLA can be smoothed by ironing with 20% flow and 20mm/s speed.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)