Weatherproof Cable Housing - 2 Versions - Free 3D Print Model

Search models, users, collections, and posts

johnyohanna

Hobby & DIY>Electronics

IP Report

Print Profile(1)

All

H2D

P1S

P2S

P1P

H2D Pro

A1 mini

H2S

X1E

X1 Carbon

0.16mm layer, 2 walls, 15% infill

Designer

4.5 h

2 plates

5.0(1)

Open in Bambu Studio

Boost

Released

Description

This is a housing for a LP20 weatherproof connector. I used it so that I could quickly move my starling dish from where I had it mounted on my home, over to my camper van.

There are two versions, one with an open bottom so the cable can come from underneath, and the second version with a sealed bottom that uses a M20 X 1.5 cable gland. Both need 4 M3 X 4 heat press inserts.

Here's a link to the connector I used. (Make sure you get the bolt down version with the 4 holes).

https://www.aliexpress.us/item/3256806594701453.html?spm=a2g0o.order_detail.order_detail_item.4.5399f19cUDj2P6&gatewayAdapt=glo2usa

I recommend printing in ASA so that it can stand up to the elements if it's going to be outside.

Comment & Rating (1)

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.