Slide Rails for IKEA KALLAX – Display Front

Description (DE)
With these 3D-printed guide rails, a KALLAX compartment becomes a simple display cabinet. You glue the rails to the inside of the front; they hold 330×330 mm acrylic sheets with 2 mm thickness. The panel is pushed in from above and can be pulled out again at any time. Knob optional (glue to top center).
Note: dust-reduced, not airtight – due to design, small side slots remain.

Description (EN)
These 3D-printed slide rails turn an IKEA KALLAX cube into a minimal display front. Stick the rails to the inner front edges; they hold 330×330 mm acrylic sheets (2 mm thick). The panel slides in from the top and can be removed anytime. Optional knob (top center).
Note: dust-reduced, not airtight – small side slots remain by design.