Mini escena de calabazas de Halloween

Give an adorable and spooky touch to your Halloween decor!
This model displays a small scene inside a pumpkin: a curious ghost, a couple of decorative pumpkins, 3D printed grass, and a streetlamp that lights up Halloween night.
Ideal for multi-color printing or using AMS, no supports needed.

Printing recommendations:

• Recommended layer height: 0.2 mm.
  If you want even more detail quality (at the cost of more time and filament changes with AMS), you can use 0.16 mm or even 0.12 mm. However, with 0.2 mm the result is excellent, as seen in the photos.
• Material: PLA
• Supports: Not needed
• Multi-color printing recommended.

Printing and assembly tips:

• Grass:
  Make sure to keep the part in its original orientation when printing. This way, the slicer will correctly generate the bridges that form the grass strands. If you change the orientation, the part will not print properly.
• Assembly:
  To fit the grass into the pumpkin, cut the piece in half with scissors (with patience, everything will be perfect) and press the two halves firmly into the pumpkin until they fit (the fit is quite snug to avoid needing glue). You can trim the grass to your preferred height to customize the finish and shape it as you like.
  The other pieces (the streetlamp, small pumpkins, and ghost) can be easily placed by pressing them slightly onto the grass and securing them with a small amount of glue.