Arina's Folding Lamp

Fully 3D-printable folding desktop lamp with changeable lids

Here is an adjustable and foldable desktop lamp with a pencil case and optional interchangeable lids.

All parts are 3D printable (no need for AMS). The only additional element is an LED lamp, such as the Bambu LED Lamp Kit 001 or any analogue with D60x8mm size (I used one from a marketplace). 

You will also need a piece of filament for the axis. Or you can use any axis you want (for example, a nail or a piece of wire). I used filament - it works quite well.  

Note: 

The print profile requires supports, which are not easy to remove. 

Please, don't change the print settings, especially for Plate 1. Otherwise, you may obtain a failed print. 

After removing the supports, the lamp is easy to assemble.

Additional profile: 

Version for left-handed people. When I printed the first copy, I realized that it would be inconvenient for a left-handed person to use the basic version, since the lamp is located the other side to the user, therefore, instead of adjusting screws, the user sees a wire. So I did a complete redesign specifically for left-handers.

Printing and assembling tips:

Additional information:
The model Baseball cap - Lid for Arina's Folding Lamp is published. It's ready for printing. I additionally provided a .step file for that model. If you work with Fusion or any other CAD program, feel free to develop your own lids. It's funny ;) 

And I plan to design several different models of alternative hats and other types of lids for this lamp.

Good luck when printing!